MO-Band Quickstart

September 08, 2019 | Alan Liu

In this tutorial, I’m going to show you what’s inside the box, and how to get started with MO-Band in 3 minutes.

Inside the box, you’ll find MO-Band, MO-Key, a USB type C to USB cable, and a introduction booklet. Take them out and follow along to get started.

  1. Download S-Motion software from here.
  2. Press and hold power button to turn on MO-Band.
  3. Plug MO-Key into your computer
  4. Pair MO-Key with MO-Band by pressing the top button on MO-Key (The two need to be close to each other).
  5. Calibrate MO-Band by holding the bypass button and drawing figure eight in the air.
  6. Open S-Motion Software and click on the power button on the top-left corner.

And you are all set, you should see the data coming. In next tutorial, I’m going to walk you through S-Motion software, and let you know how to use MO-Band to control your DAW.